Entegra is a Native American-owned small business and provides instruments for metrology and calibration services.

Model 1150 Pulse Generator

Model 1150 – Ultra-High Speed Reference Pulse Generator

The Model 1150 Ultra-High Speed Reference Pulse Generator was designed to provide pulses suitable to calibrate oscilloscopes with up to 50 GHz bandwidth.  It provides both a short positive and short negative-going transition duration (typical risetimes are 10 ps and typical falltimes are 9 ps).  It exhibits a low short term settling error of less than 1 % in 10 nanoseconds.  The output levels are approximately -600 mV and 0 V and the resulting 600 mV pulse amplitude exercises the inputs of sampling oscilloscopes by supplying a pulse that is up to 75 % of oscilloscope’s input operating range.  (Option 1: output levels of 0 V and +600 mV.)

The mainframe includes an internal 100 MHz trigger source and also accepts an external trigger from either a pulse or sine wave source. Either trigger source is conditioned to provide the trigger for the oscilloscope.  (Option 2: different internal oscillator frequency.)

The pulse head is attached to the mainframe by a 3 foot long cable pair that allows the pulse head output to be connected directly to the oscilloscope input without any intervening cables that can slow the pulse transition.  The output connector is a male 1.85 mm coaxial connector designed to mate with most ultra-high speed oscilloscope inputs without an adapter.  (Option 3: user specified output connector – 1.85 mm female, 2.4 mm male or female.)

Typical Performance

    • 9 ps negative-going transition duration (10 % to 90 % falltime)
    • 10 ps positive-going transition duration (10 % to 90 % risetime)
    • 600 mV amplitude
    • 50 GHz (-3dB) bandwidth (from FFT of measured waveform)
    • 15 % overshoot (positive and negative-going transition)
    • 10 % undershoot (positive-going transition), 4 % (negative-going transition)
    • 1 % short term settling error in 10 ns epoch
    • 5 % settling error in 100 ns epoch
    • 80 MHz to 12 GHz pulse repetition rate
    • ± 0.4 ps rms jitter

Dimensions (Mainframe)

    • Height: 132.6 mm (5.22 in.)
    • Width: 288.8 mm (11.37 in.)
    • Depth: 330.2 mm (13.0 in.)

Dimensions (Pulse Head)

    • Height: 66.4 mm (2.615 in.)
    • Width: 39.6 mm (1.56 in.)
    • Depth: 69.8 mm (2.75 in.)

Options

    • Option 1: the output switches between 0 V and +600 mV
    • Option 2: change oscillator frequency
    • Option 3: change pulse output connector – N, SMA, 2.92 mm, 3.5 mm, 2.4 mm, 1.85 mm
    • Option 4: 220 VAC, 50 Hz power input for use in Europe and other locations

 

Copyright © 2014 Entegra Corporation. All rights reserved.